Ordering AccuCT H100-200 from third party

[Tjootjim]

I added some solar and batteries, and need to get 2x200A and 1x100A CTs. I am confused though; the AcuCT-H100-200 appears to be a 333mV output. Is this the correct unit?

I assume if so the burden resistor of the IoTaWatt can be disabled in software.

Thanks. I ordered the 333mV units and then looked up the instructions… and would like to make it work if possible.

[overeasy]

@Tjootjim

I added some solar and batteries, and need to get 2x200A and 1x100A CTs. I am confused though; the AcuCT-H100-200 appears to be a 333mV output. Is this the correct unit?

No, that is a mV model. IoTaWatt requires 50mA output. You can get them from CircuitIQ.

[Tjootjim]

Thanks. Ordered.