Pushing only HWS/Voltage data to PVOutput?

Support
1

Hi, I would like;

My IoTaWatt to only push Voltage & A single sub circuit (Hot Water System) to PVOutput.
AND
My Enphase Envoy to push PV Production & All other consumption to PVOutput.

At the moment it does not appear that I can do this.
The IoTawatt is forcing me to push Production or Consumption as a minimum to PVO, can this restriction be lifted?

2

I think this is a restriction imposed by PVOutput.

image
image.png1946×2192 754 KB

1 Like
3

@mrmachine is right. From the PVoutput docs:

  • At least one of the values v1 , v2 , v3 or v4 must be present.