Looks like there is a problem downloading the latest firmware update 02_08_03. These kinds of problems only seem to happen in Australia. It could be your SDcard, but I suspect it has something to do with timeouts from your ISP.
The new release blob is cached around the world by Cloudflare. Your ISP should be getting it from a local Cloudflare server, but not necessarily. If not, the path back to IoTaWatt server in the USA is long and convoluted between Australia and the USA.
I would suggest doing the following:
- Temporarily remove the internet connection from your router.
- IoTaWatt should stop rebooting as it will not be able to establish an update connection.
- Using the IoTaWatt app, set auto-update to NONE.
- Reconnect your internet.
Alternatively, you can power down the unit, remove the SDcard and edit the config.txt file to change the line:
"update": "MINOR",
to
"update": "NONE",
Your unit should now run fine under release 02_08_02. There is no functional difference between 02_08_02 and the update 02_08_03. It is just an update of defaults and tables.
If you want to update to 02_08_03 or any future firmware version, use the manual method described here: